Home>Products>SMITH BEARING>SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type
SMITH CR-1-3/8-XC MODELS
Need a CAD or 3D Model?
SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type
category
SMITH BEARING
SMITH CR-1-3/8-XC Bearing SPECIFICATIONS
SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type Engineering Calculator , SMITH BEARING Manufacturing 8.13 Hz Characteristic outer ring frequency, BPF0 Service . Get Bearing Driveshaft do Brasil Your Free.
- SMITH
CR-1-3/8-XC
- 8.13 Hz
- 0.43 Hz
- SNR
- 0.22
- 31 mm
- 130 mm
- 1.5 mm
- 117.8 mm
- Bearing Driveshaft do Brasil2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Information techniques SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type
- 8.13 Hz
- 0.43 Hz
- SNR
- 0.22
- 31 mm
- 130 mm
- 1.5 mm
- 117.8 mm
- 4,600 rpm
- 200 °C
SMITH CR-1-3/8-XC SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type Compare similar products
No. | Brand | Z | D | e | S | J | G | L | b |
CR-1/2 | SMITH | - | - | - | - | - | - | - | - |
MCRV-62-C | SMITH | - | - | - | - | - | - | - | - |
HR-1-3/8-XC | SMITH | - | 901.573 mm | - | - | - | - | - | - |
MYR-5-S | SMITH | - | - | - | - | - | - | - | - |
CR-1-1/4-XBE | SMITH | - | - | - | - | - | - | - | - |
MCRV-16-BC | SMITH | - | - | - | - | - | - | - | - |
CR-9/16-C | SMITH | - | - | 0.31 | - | - | - | - | - |
HR-3-XB | SMITH | 70 mm | - | - | 19 mm | - | - | - | - |
CR-1-B | SMITH | - | - | - | - | - | - | 113 mm | - |
MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
DYR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
CR-1/2-C | SMITH | 49.6 mm | - | 20 mm | - | - | - | - | - |
YR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
HR-3-X | SMITH | - | - | - | - | - | - | - | - |
CR-3-X | SMITH | - | - | - | 19 mm | - | M6x1 | - | - |
MCR-52-B | SMITH | - | - | - | - | - | - | - | - |
CR-2-1/2-C | SMITH | - | 62 mm | - | - | - | - | - | - |
MCR-72-C | SMITH | - | - | - | - | - | - | - | - |
MFCR-72 | SMITH | - | 140 | - | - | - | - | - | - |
YR-1-3/4-C | SMITH | - | - | - | 24.5 mm | - | - | - | - |
MCR-32-SBC | SMITH | - | - | - | 6.5 mm | - | M6x1 | - | - |
MCR-40-SB | SMITH | - | - | - | - | - | - | 70 mm | - |
MYR-20 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
CR-5/8-XBEC | SMITH | 74.3 mm | - | 30 mm | 25.4 mm | 149 mm | - | 187 mm | - |
IRR-2-5/8 | SMITH | 18.5 mm | - | - | - | - | R1/8" | - | - |
SMITH MCRV-35-S Cam Follower and Track Roller - Stud Type | B - Cone Width:32.000 mm; D:140.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:56300 N; Da - Cup Frontface Backing Diameter:134.87 mm; Cup Part Number:Y32018XSA; d:90 mm; Aa - Cage-Cone Backface Clearance:2.5 mm; G1 - Heat Generation Factor (Roller-Raceway):127.5; Design Units:METRIC; da - Cone Frontface Backing Diameter:98.04 mm; |
SMITH YR-3-C Cam Follower and Track Roller - Yoke Type | Bearing Part Number:7004; Flange O.D. H(φ):92; Bearing I.D. d(mm):20; Cover Type Selection:R (for O-Ring); Number of Bearings:Double; Volume Discount:Available; Flange Shape:Round Type; Days to Ship:10 Days or more; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; |
SMITH CR-1-B Cam Follower and Track Roller - Stud Type | N:22mm; L1:70 mm; s1:19.05 mm; A2:28 mm; L:113 mm; C:19.5 kN; B:38.1 mm; Recommended tightening torque for set screw:3.7 Nm; H1:89 mm; L3:57 mm; |
SMITH CR-2-1/2-C Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:5.43 Hz; da min:35 mm; Brand:SNR; d1:37.9 mm; Characteristic cage frequency, FTF:0.4 Hz; Static load, C0:0.01 kN; D1:55.1 mm; d:30 mm; Characteristic rolling element frequency, BSF:4.62 Hz; D:62 mm; |
SMITH PYR-3-1/4 Cam Follower and Track Roller - Yoke Type | Bearing UPC:013992031853; Dimension P:0.6 in; Dimension R:9.5 in; Note:This product line wa; Bearing - Housing - Seal:MSE204BRHHTPS; Dimension H:2.9 in; Support Type:Round Flange; Dimension L:5.4 in; Cr - Dynamic Load Rating:37768 lbf; Dimension N:7.563 in; |
SMITH CR-1-1/8-XBE Cam Follower and Track Roller - Stud Type | N2:32 mm; Designation of housing:T205-; L1:62 mm; Designation of bearing:UC205-15G2T20; C:14 kN; N:19mm; T min.:-20 °C; A5:19.7 mm; H2:51 mm; L:97 mm; |
SMITH HR-3-1/4-B Cam Follower and Track Roller - Stud Type | L:117 mm; Z:29.6 mm; G:M6x1; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; A2:44.4 mm; Designation of housing:F207N-; T min.:-20 °C; N:14mm; e:19 mm; |
SMITH HR-7/8-XB Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6903; Bearing I.D. d(mm):17; Flange Shape:Square Type; Days to Ship:7 Days; Flange O.D. H(φ):60; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; |
SMITH MYRV-50-C Cam Follower and Track Roller - Yoke Type | Shape:Flanged Pilot Type; Flange Shape:Square Type; Volume Discount:Available; Flange O.D. H(φ):77; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; RoHS:6; Bearing Retained:No; |
SMITH YR-3-1/2-C Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Material:Bearing Steel; Weight:0.50 lb; Seal Type:Narrow Shroud; Outside Ring Width C:14.000 mm; Outside Diameter D:1.850 in; Dynamic Load Rating:3190 lbf; Center of Bearing from End S:8.86 mm; O.D. Type:Cylindrical OD; |
SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Days to Ship:8 Days; Bearing I.D. d(mm):20; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Housing Material:1045 Carbon Steel; |
SMITH MYR-35-SC Cam Follower and Track Roller - Yoke Type | Characteristic outer ring frequency, BPF0:18.67 Hz; Fw:56 mm; Nlim (grease):5,000 rpm; Characteristic cage frequency, FTF:0.48 Hz; b:17.8 mm; Mass:0.03 kg; Ew:61 mm; Characteristic inner ring frequency, BPFI:20.33 Hz; Dw:2.5 mm; Cr:23.3 kN; |
SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type Video
SMITH CR-1-3/8-XC INTERCHANGE
SMITH BEARING Part series CR-1-3/8-XC is a potential replacement for these common bearing part numbers:
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
CR-1-3/8-XC
Contact Us
- Bearing Driveshaft do Brasil
- AddressEstrada Municipal, 400 Bairro Jardim Santo Afonso, CEP 07215-040, Guarulhos-Sao Paulo, Brasil
- Phone(Working Time)2085-5987
- Fax
SMITH CR-1-3/8-XC Technical Articles
NTN BEARING PRICE LIST 2020 |
ZWZ BEARING PRICE LIST 2018 |
ARB BEARINGS PRICE LIST 2019 |
SMITH BEARING CATEGORIES
- AMI BEARING
- AURORA BEARING
- BROWNING BEARING
- BUNTING BEARINGS
- KOYO Bearing
- NTN Bearing
- SKF Bearing
- SMITH BEARING
- Toyana Bearing
- Ge 60 ES Bearing
- Sy506m Bearing
- Lgwa 2 SKF Bearing
- SKF 1612 Bearing
- Bearing Slewing Ring
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Super Precision Bearings
- Slewing Ring
- Tapered Roller Bearing Assembly
- Angular contact ball bearing
- Cylindrical Roller Bearing
- Complex Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings